Training Gas Turbine Operation & Maintenance

Training Gas Turbine Operation & Maintenance merupakan program pelatihan teknis yang dirancang untuk meningkatkan kompetensi peserta dalam memahami prinsip kerja, pengoperasian, inspeksi, pemeliharaan, troubleshooting, dan peningkatan keandalan Gas Turbine pada fasilitas industri, pembangkit listrik, serta industri Oil & Gas.

Gas turbine merupakan salah satu rotating equipment penting yang digunakan sebagai prime mover maupun pembangkit tenaga. Keandalan gas turbine sangat dipengaruhi oleh kualitas pengoperasian, monitoring parameter, preventive maintenance, inspection, combustion system, lubrication system, fuel system, serta kemampuan personel dalam melakukan troubleshooting terhadap abnormal operating conditions.

Melalui Training Gas Turbine Operation & Maintenance dari Johnson Indonesia, peserta akan mempelajari Gas Turbine Fundamentals, Compressor Section, Combustion System, Turbine Section, Fuel System, Lubrication System, Starting System, Gas Turbine Performance, Preventive Maintenance, Inspection, Troubleshooting, serta prinsip peningkatan reliability gas turbine.

Tujuan Training Gas Turbine Operation & Maintenance

Setelah mengikuti Pelatihan Gas Turbine Operation & Maintenance, peserta diharapkan mampu:

• Memahami prinsip dasar dan cara kerja Gas Turbine.
• Memahami komponen utama Gas Turbine dan fungsinya.
• Memahami proses compression, combustion, dan expansion pada Gas Turbine.
• Memahami prosedur starting, normal operation, shutdown, dan emergency shutdown.
• Memahami parameter penting dalam pengoperasian Gas Turbine.
• Memahami sistem bahan bakar, pelumasan, starting, dan control system.
• Memahami prinsip inspeksi dan pemeliharaan Gas Turbine.
• Melakukan identifikasi terhadap abnormal operating conditions.
• Memahami metode troubleshooting Gas Turbine.
• Meningkatkan reliability dan availability Gas Turbine.
• Mengurangi risiko equipment failure dan unplanned shutdown.

Manfaat Training Gas Turbine Operation & Maintenance

Melalui program Gas Turbine Operation and Maintenance Training, peserta akan memperoleh pemahaman teknis untuk:

• Mengoperasikan Gas Turbine secara efektif dan aman.
• Memahami fungsi dan karakteristik setiap komponen utama Gas Turbine.
• Melakukan monitoring terhadap operating parameters.
• Mendeteksi indikasi gangguan atau penurunan performance.
• Memahami Preventive Maintenance Gas Turbine.
• Memahami inspection requirement pada Gas Turbine.
• Menganalisis penyebab umum Gas Turbine failure.
• Melaksanakan basic troubleshooting secara sistematis.
• Mendukung peningkatan reliability dan availability equipment.
• Mengurangi downtime dan maintenance cost.

Materi Training Gas Turbine Operation & Maintenance

1. Gas Turbine Fundamentals

• Introduction to Gas Turbine.
• Gas Turbine Applications.
• Gas Turbine Working Principle.
• Brayton Cycle.
• Open Cycle Gas Turbine.
• Combined Cycle Gas Turbine.
• Industrial Gas Turbine.
• Aeroderivative Gas Turbine.
• Gas Turbine Configuration.

2. Gas Turbine Main Components

• Air Intake System.
• Axial Compressor.
• Combustion Chamber.
• Turbine Section.
• Exhaust System.
• Shaft and Bearing.
• Accessory Gearbox.
• Coupling System.
• Gas Turbine Auxiliary Systems.

3. Compressor System

• Axial Compressor Working Principle.
• Compressor Rotor & Stator.
• Compressor Blade.
• Inlet Guide Vane.
• Variable Guide Vane.
• Compressor Pressure Ratio.
• Compressor Efficiency.
• Compressor Stall.
• Compressor Surge.
• Compressor Fouling.
• Compressor Cleaning.

4. Combustion System

• Combustion Process.
• Combustion Chamber Types.
• Fuel Nozzle.
• Ignition System.
• Flame Detection.
• Combustion Stability.
• Combustion Temperature.
• Combustion Inspection.
• Common Combustion Problems.

5. Turbine Section

• Turbine Working Principle.
• Turbine Rotor.
• Turbine Blade.
• Nozzle Guide Vane.
• Hot Gas Path.
• Blade Cooling.
• Thermal Stress.
• Turbine Efficiency.
• Hot Section Inspection.

6. Gas Turbine Fuel System

• Gas Fuel System.
• Liquid Fuel System.
• Fuel Control Valve.
• Fuel Pressure Control.
• Fuel Flow Control.
• Fuel Nozzle.
• Fuel Filtering System.
• Fuel System Inspection.
• Fuel System Troubleshooting.

7. Lubrication System

• Lubrication System Function.
• Lubricating Oil.
• Main Oil Pump.
• Auxiliary Oil Pump.
• Emergency Oil Pump.
• Oil Filter.
• Oil Cooler.
• Bearing Lubrication.
• Oil Pressure Monitoring.
• Oil Temperature Monitoring.
• Lubrication System Troubleshooting.

8. Starting & Ignition System

• Gas Turbine Starting Sequence.
• Starting System.
• Cranking.
• Purging.
• Ignition.
• Acceleration.
• Synchronization.
• Normal Operating Speed.
• Starting Failure Analysis.

9. Gas Turbine Operation

• Pre-Start Inspection.
• Start-Up Procedure.
• Normal Operation.
• Operating Parameter Monitoring.
• Load Operation.
• Normal Shutdown.
• Emergency Shutdown.
• Restart Procedure.
• Operating Limits.

10. Gas Turbine Control & Protection System

• Gas Turbine Control Philosophy.
• Speed Control.
• Load Control.
• Temperature Control.
• Fuel Control.
• Alarm System.
• Trip System.
• Overspeed Protection.
• High Temperature Protection.
• Vibration Protection.

11. Gas Turbine Performance

• Gas Turbine Power Output.
• Thermal Efficiency.
• Heat Rate.
• Specific Fuel Consumption.
• Compressor Efficiency.
• Turbine Efficiency.
• Effect of Ambient Temperature.
• Effect of Pressure.
• Effect of Compressor Fouling.
• Gas Turbine Performance Monitoring.

12. Gas Turbine Maintenance Strategy

• Maintenance Philosophy.
• Corrective Maintenance.
• Preventive Maintenance.
• Predictive Maintenance.
• Condition-Based Maintenance.
• Maintenance Planning.
• Maintenance Scheduling.
• Maintenance Documentation.
• Spare Parts Management.

13. Gas Turbine Inspection

• Routine Inspection.
• Borescope Inspection.
• Combustion Inspection.
• Hot Gas Path Inspection.
• Major Inspection.
• Compressor Inspection.
• Turbine Blade Inspection.
• Bearing Inspection.
• Inspection Interval.
• Inspection Documentation.

14. Condition Monitoring Gas Turbine

• Vibration Monitoring.
• Temperature Monitoring.
• Pressure Monitoring.
• Speed Monitoring.
• Lubricating Oil Monitoring.
• Performance Trending.
• Abnormal Condition Detection.
• Early Failure Detection.

15. Gas Turbine Troubleshooting

• Systematic Troubleshooting Method.
• Failure Identification.
• Abnormal Vibration.
• High Exhaust Temperature.
• Low Power Output.
• High Fuel Consumption.
• Starting Failure.
• Compressor Problem.
• Combustion Problem.
• Lubrication Problem.
• Bearing Problem.
• Control System Problem.
• Root Cause Analysis.

16. Gas Turbine Reliability Improvement

• Equipment Reliability.
• Gas Turbine Availability.
• Failure Mode Identification.
• Root Cause Failure Analysis.
• Preventive Action.
• Maintenance Optimization.
• Performance Improvement.
• Reducing Unplanned Shutdown.

17. Safety in Gas Turbine Operation & Maintenance

• Gas Turbine Operational Hazards.
• High Temperature Hazard.
• Rotating Equipment Hazard.
• Fuel Gas Hazard.
• Fire & Explosion Hazard.
• Personal Protective Equipment.
• Lock Out Tag Out (LOTO).
• Permit to Work.
• Emergency Response.
• Safe Maintenance Practices.

18. Case Study Gas Turbine Operation & Maintenance

• Gas Turbine Start-Up Problem.
• Compressor Performance Problem.
• Combustion Problem.
• High Vibration Problem.
• High Exhaust Temperature.
• Gas Turbine Trip Analysis.
• Maintenance Case Study.
• Root Cause Analysis.
• Discussion & Lesson Learned.

Target Peserta

Training Gas Turbine Operation & Maintenance direkomendasikan bagi personel yang bekerja atau berkaitan dengan operasi dan pemeliharaan Gas Turbine, antara lain:

• Mechanical Engineer
• Maintenance Engineer
• Operation Engineer
• Rotating Equipment Engineer
• Reliability Engineer
• Power Plant Engineer
• Oil & Gas Engineer
• Instrumentation Engineer
• Electrical Engineer
• Condition Monitoring Engineer
• Maintenance Planner
• Gas Turbine Operator
• Plant Operator
• Maintenance Technician
• Mechanical Technician
• Supervisor
• Superintendent
• Maintenance Manager
• Operation Manager
• Technical Personnel lainnya

Pembicara / Fasilitator

Team Trainer Johnson Indonesia

Pelatihan disampaikan oleh trainer yang memiliki kompetensi dan pengalaman dalam bidang Gas Turbine, Rotating Equipment, Operation, Maintenance, Reliability, dan bidang industri terkait.

Materi dan studi kasus dapat disesuaikan dengan jenis Gas Turbine dan kebutuhan operasional perusahaan.

Jadwal Training Gas Turbine Operation & Maintenance 2026

Periode	Tanggal Pelaksanaan
September 2026	23–24 September 2026
Oktober 2026	26–27 Oktober 2026

Catatan: Jadwal dapat berubah atau disesuaikan dengan agenda Johnson Indonesia. Silakan melakukan konfirmasi untuk memperoleh informasi jadwal terbaru dan status Fix Running.

Durasi Training

• Durasi: 2 Hari
• Pelaksanaan: Public Training / In-House Training

Metode Training

• Presentation.
• Interactive Discussion.
• Technical Explanation.
• Case Study.
• Problem Solving.
• Troubleshooting Exercise.
• Sharing Experience.
• Discussion & Question Answer.

Investasi Training Gas Turbine Operation & Maintenance

Untuk mendapatkan informasi fee investasi dan harga promo Training Gas Turbine Operation & Maintenance terbaru, silakan menghubungi Johnson Indonesia.

Investasi Public Training maupun In-House Training dapat disesuaikan dengan metode pelaksanaan, jumlah peserta, lokasi, durasi, serta kebutuhan perusahaan.

Fasilitas Training

• Training Material
• Seminar Kit
• Certificate
• Lunch
• Coffee Break / Snack
• Souvenir

Daftar Client Johnson Indonesia

Johnson Indonesia – Training Provider Since 2002 telah memberikan layanan Public Training dan In-House Training kepada berbagai perusahaan dari sektor Oil & Gas, Energy, Power Generation, Manufacturing, Mining, BUMN, dan industri lainnya.

Untuk melihat daftar perusahaan yang telah menggunakan layanan Johnson Indonesia, silakan mengunjungi:

Daftar Client Johnson Indonesia

Training Gas Turbine & Oil Gas Terkait

Selain Training Gas Turbine Operation & Maintenance, peserta dapat mengikuti berbagai program training terkait untuk meningkatkan kompetensi pada bidang Oil & Gas, operation, maintenance, dan reliability.

• 
  Training Oil & Gas Processing Fundamentals
  
• 
  Training Drilling Engineering & Well Control
  
• 
  Training RIG and Equipment Selection
  
• 
  Training Drilling Problem Analysis
  
• 
  Training Oil Export System Operation
  
• 
  Oil & Gas Training Series
  

Mengapa Mengikuti Training Gas Turbine Operation & Maintenance?

Gas Turbine merupakan critical rotating equipment yang membutuhkan pengoperasian dan pemeliharaan secara tepat untuk menjaga reliability, availability, performance, dan keselamatan fasilitas.

Gangguan seperti Compressor Fouling, Compressor Surge, Combustion Problem, High Exhaust Temperature, Abnormal Vibration, Lubrication Problem, Starting Failure, dan penurunan performance dapat menyebabkan equipment trip, peningkatan fuel consumption, hingga unplanned shutdown.

Melalui Training Gas Turbine Operation & Maintenance, peserta mempelajari hubungan antara Gas Turbine Operation, Compressor, Combustion System, Turbine Section, Fuel System, Lubrication System, Control & Protection System, Condition Monitoring, Preventive Maintenance, serta Gas Turbine Troubleshooting.

Kompetensi tersebut dapat membantu perusahaan meningkatkan keandalan equipment, mengurangi downtime, mengoptimalkan maintenance, serta meningkatkan efisiensi operasi Gas Turbine.

Public Training Gas Turbine Operation & Maintenance

Johnson Indonesia – Training Provider Since 2002 menyediakan Public Training Gas Turbine Operation & Maintenance bagi engineer, operator, technician, supervisor, dan manager yang ingin meningkatkan kompetensi dalam pengoperasian serta pemeliharaan Gas Turbine.

In-House Training Gas Turbine Operation & Maintenance

Program In-House Training Gas Turbine Operation & Maintenance dapat disesuaikan dengan kebutuhan perusahaan. Materi dapat difokuskan berdasarkan jenis Gas Turbine, manufacturer, konfigurasi equipment, operating condition, maintenance strategy, serta masalah aktual yang terjadi di fasilitas perusahaan.

Pembahasan dapat difokuskan pada Gas Turbine Operation, Preventive Maintenance, Inspection, Condition Monitoring, Performance Analysis, Troubleshooting, maupun Reliability Improvement.

Training Gas Turbine Operation & Maintenance Indonesia

Program Training Gas Turbine Operation & Maintenance Indonesia dari Johnson Indonesia tersedia dalam format Public Training maupun In-House Training untuk mendukung peningkatan kompetensi personel pada sektor Oil & Gas, Energy, Power Plant, Petrochemical, Manufacturing, dan industri lainnya.

Informasi & Registrasi Training

Johnson Indonesia – Training Provider Since 2002

Telp: (021) 5417516
WhatsApp: 0858 8690 3082
WhatsApp: 0815 9725 020
Website: www.seminarjohnson.com
Website: www.trainingsdm.com

Daftarkan tim perusahaan Anda untuk mengikuti Training Gas Turbine Operation & Maintenance dan tingkatkan kompetensi dalam Gas Turbine Operation, Preventive Maintenance, Inspection, Performance Monitoring, Condition Monitoring, Troubleshooting, dan Reliability Improvement.

“`